BLOCK: An align honed, torque plate diamond finished honed, parallel decked, GM 350 4bolt 1 piece rear main seal block, with ARP main bolts.

CRANK: SCAT 9000 series 3.750” stroke, 1 piece rear main seal crankshaft with aero-wing counterweights and lightening holes in all rods. Micro-polished to a single digit RA.

RODS: Forged 4340, 5.700” I beam rods with 7/16 ARP cap screw bolts.

CAMSHAFT: Comp Cams custom hydraulic roller camshaft with 110 degree lobe separation.

PISTONS AND RINGS: 9.0-1 hypereutectic, step dish pistons with plasma moly rings.
GASKETS: Felpro complete set

OIL PUMP AND DELIVERY: Melling HV pump, pickup tube, and ARP heavy duty drive shaft

OIL PAN: Moroso 7qt. 8 1/4" deep with kicked out sump and trap door internal baffling. Installed with ARP fasteners.

BALANCE: Externally zero balanced with new 8" harmonic balancer and flexplate.

CYLINDER HEADS: DART Pro 1 Platinum, 2.02/1.60, 180cc intake runner Aluminum Cylinder heads with stainless valve train. Fastened with ARP head bolts.

PUSHRODS AND ROCKERS: Full Roller, 1.50 ratio rocker arms, with extra large full needle bearing trunions for increased HP and hardened aftermarket pushrods.

INTAKE MANIFOLD: Performer RPM dual plane with ARP intake bolts.

WATER PUMP: Edelbrock High Performance short style

DISTRIBUTOR AND WIRES: Hei High Performance with Taylor 8mm, 90 degree plug wires.

CARBURETION: Quick Fuel 680cfm, billet throttle body, vacuum secondary, with electric choke.

DISTRIBUTOR AND WIRES: MSD Pro Billet with Taylor 8mm, 90 degree plug wires.
CARBURETION: Holley 750cfm dichromate double pumper.
.

** Add Billet Specialties TRU TRAC Serpentine System:
w/ AC w/ Power Steering: $2145.00
w/ AC w/o Power Steering: $1795.00
w/o AC w/ Power Steering: $1745.00
w/o AC w/o Power Steering: $1395.00

CH383PERFORMER
FULL DYNO PACKAGE: $6895
BASIC CRATE: $5230**




 


By far our most popular combination!
It’s gone in just about anything and everything with wheels. There is very little that needs to be said other than look at the video, check out the dyno sheet, and take an educated look at the overall package. There is absolute zero question in our minds that our CH383 Performer is a tremendous street engine!

* Noticeable idle
* Power Brakes OK
* Must be run with 2500rpm stall speed converter
* Dyno tested and tuned. Comes with individual dyno printout.
* Prefers 91 octane
* Customization available
* Except as noted, not legal for sale or use with pollution controlled motor vehicles

**BASIC CRATE ENGINES ARE NOT INDIVIDUALLY DYNO TESTED AND HAVE A SEPARATE WARRANTY FROM FULL DYNO PACKAGES. PLEASE SEE WARRANTY PAGE.

 

 

 

 

 

 

 

 

CHEVY ENGINES | HOME

 

This page and its contents ©2008 BokanPerformance.com